LDP Single Girder Overhead Cranes with Side-Mounted Hoists: Optimal Solution for Low-Ceiling Workshops
The LDP single girder overhead cranes with side-mounted hoists are a lightweight lifting equipment designed to run on I-beam tracks, with the load suspended from it. It mainly consists of an electric hoist, metal structure, trolley running mechanism, power supply device, and electrical system.
The LDP single girder overhead cranes with side-mounted hoists are an ultra-low headroom lightweight crane, often used in conjunction with CD or MD electric hoists. The hoist is located on one side of the main girder, which increases the service space for the hook, thereby reducing the building height and cost. It is particularly suitable for low-ceiling workshops.
- Capacity: 3-10ton
- Span length: 7-22.5m
- Lifting height: 6-12m
- Work duty: A3
- Raged voltage: 380V, 50Hz, 3ph AC
- Work environment temperature: -25℃～+40℃, relative humidity ≤85%
- Crane control mode: Floor control / Remote control
Features
- High Space Utilization: Ideal for sites with limited building height, maximizing the use of available space.
- Compact Structure: The design incorporates an offset lifting mechanism, making the crane’s overall structure more compact.
- Stable Operation: The offset design does not affect the equipment's center of gravity, ensuring smooth operation and preventing load swinging.
- Low Maintenance Cost: Standardized electric hoists and drive devices make parts easier to maintain and replace.
- Wide Application: Widely used in industries such as light industry, machinery manufacturing, warehousing, and logistics.
For detailed product information, please refer to the PDF.
LD Single Girder Overhead Cranes vs LDP Single Girder Overhead Cranes
| LD Single Girder Overhead Cranes | LDP Single Girder Overhead Cranes | |
|---|---|---|
| Lifting height | Since the electric hoist is suspended below the main beam, the overall lifting height is relatively low, which is usually suitable for standard factory buildings. | Because the electric hoist is located on the top side of the main beam, it can provide a larger lifting height, which is suitable for occasions where the lifting height needs to be increased. |
| Application scenarios | Widely used in conventional material handling occasions, especially in space plants that are too restricted. | Suitable for those workshop headroom heightislimited,butneed higher lifting requirements, can more effectively use the space inside the workshop. |
| Economic costs | Because the structure is simple, the steel and parts used are relatively standardized, and the material cost is low. | Due to the special design, more custom parts are required, especially to meet the higher lifting requirements, the material cost is usually higher than the LD type. |
| Hidden costs | Suitable for ordinary workshops with low height requirements, able to meet most lifting needs, but may be required if a higher lifting height is required to increase the plant space, thereby increasing the invisible cost. | Suitable for sites with limited plant heights, although the initial purchase and installation costs are higher, it can avoid the transformation of the plant, thereby reducing some long-term invisible costs. |
Case
The indoor crane for the renovation project of the sluice emergency support center building at the Yangzhou Navigation Administration.
- Lifting Capacity: 5T
- Span: 10m
- Lifting Height: 4.5m
- Work Duty: M3
- Lifting Speed: 8m/min
- Travel Speed: 20m/min
Whether it’s improving efficiency or optimizing space utilization, our equipment can bring significant advantages to your business.
Our professional team will provide tailor-made solutions based on your specific needs and offer comprehensive after-sales support to ensure the long-term stable operation of the equipment. Contact us today to learn how the LDP Single Girder Overhead Cranes with Side-Mounted Hoists can optimize your production processes and make the most of every inch of your space!
