- INDUSTRIES
-
EQUIPMENT
-
Overhead Cranes
-
Single Girder Overhead Crane
-
Double Girder Overhead Crane
-
Underslung Cranes
-
Workstation Overhead Cranes
-
Low Headroom Overhead Cranes
-
Grab Bucket Overhead Crane
-
Electromagnetic Overhead Cranes with Lifting Magnet
-
Electromagnetic Overhead Cranes with Magnet Beam
-
Manual Overhead Cranes
-
Double Trolley Overhead Cranes
-
- Eot Cranes
- Gantry Cranes
- Jib Cranes
- FEM Standard Crane & Hoist
- Hoist & Winch Trolley
- Light Cranes
- Explosion Proof Cranes and Hoists
-
Special Cranes
-
35-65t Clamp Overhead Crane
-
Boat Hoists
-
Boat Jib Crane
-
Yacht Davit Crane
-
Rail Mounted Container Gantry Crane
-
Cleanroom Overhead Cranes
-
YZ Ladle Handling Cranes
-
LDY Metallurgical Single Girder Crane
-
Charging Cranes for Steel Production
-
Insulated Overhead Cranes
-
Gantry Crane for Subway and Metro Construction
-
Forging Crane
-
Quenching Overhead Crane
-
Baking Multifunctional Crane
-
- Port Cranes
- Electric Transfer Carts
-
Overhead Cranes
-
CRANE PARTS
- Crane Wheel Range
- Crane Spreader
- Crane Drives
-
Crane Electrical Equipment
-
Overload Limiter
-
Crane Cabin
-
Crane Power Supply System
-
Explosion Proof Crane Radio Remote Controls
-
Joystick Type Crane Radio Remote Controls
-
Pushbutton Type Crane Wireless Remote Controls
-
Single-pole Insulated Conductor Rails
-
Enclosed Conductor Rails
-
Seamless Conductor Rails
-
Copperhead Conductor Rails
-
- Other Cranes Parts
- ABOUT US
- CONTACT US
Crane Manufacturer and Exporter
- 10+ Years of Crane Export Experience
- Cranes Are Sold To 120+ Countries
- A Technical Team of 50+ People
- 3000+ Cases in Various Industries
Container Spreader
Container Spreaders are variably usable and have proven to be successful in worldwide use since more than 30 years - on ships, port terminals or transhipment stations. Due to the consequently applied modular principle of DGCRANE they have a very favourable ratio between empty weight and payload and can be adapted without any problems to individual requests concerning load capacity, stroke speed and increasing container sizes.
Electric Conrainer Spreader
- Adopt motor, gearbox, approach switch from international brands. Service coefficient of motor is 1.6 and above.
- Rotation and translation adopt double motor and gearbox.
- Equip with indicator light and procides the function of twist pin interlock and detection.
| Specification:JD 01ST40-41FG | Power supply | AC 380V 50Hz | |
|---|---|---|---|
| Applicable to ISO 20’、40′ container | control voltage | AC 220 | |
| Rated lifting capacity | 41t | total power | ≤6kW |
| Allowable load eccentricity | Length direction -1.25m Width direction -0.26m |
maximum consumption power | 4kW |
| protection grade | Ip55 | ||
| Load of lifting lug on four corner | 4 * 10.25 t | environmental temperature | -20℃~+40℃ |
| Telescopic type | gear motor chain transmission | twist lock type | ISO float twistlick ,gear motor drive |
| Telescopic(20’~40′) | -22s | twist lock (90°) | <1s |
| Guide plate | Fixed guide plate (detachable) | dead weight | 7.5t |
Hydraulic Conrainer Spreader
- Hydraulic Container Spreader is a type of spreaders for containers .
- Adopt gearbox, approach swith from international brands.
- Hydaylic system adopts open type system. Main components such as hydraulic pump, control valves and motors adopt imported brands.
| Specification:JD 02ST40-41MG | Power supply | AC 380V 50Hz | |
|---|---|---|---|
| Applicable to ISO 20’、40′ container | control voltage | AC 220 | |
| Rated lifting capacity | 41t | total power | ≤8kW |
| Allowable load eccentricity | Length direction -1.25m Width direction -0.26m |
system operation pressure | 100bar |
| protection grade | Ip55 | ||
| Load of lifting lug on four corner | 4 * 10.25 t | environmental temperature | -20℃~+40℃ |
| Telescopic type | hydraulic motor chain transmission | twist lock type | ISO float hydraulic cylinder drive |
| Telescopic(20’~40′) | ~24s | twist lock(90°) | <1s |
| Guide plate device | hydraulic motor drive | guide plate torque | 2400/4000N.m |
| Guide plate (180°) | 5~7s | dead weight | 8.6t |
Tilting Conrainer Spreader
Divided into two containers and one containers and container tlting speader,it is suitable for transport of bulk materials container.
It owns lightweight ,easily connect with ordinary spreader or headlock.
Remote control operation ,fully hydraulic drive . It consists of titing mechanism , telescopic mechanism , container door opening and closing mechanism and etc.
It provides the function of stable performance ,safety and efficiency ,higher working efficiency.
Two containers spreader
| Specification:DTO 02SF20-(30+30)MS | Power supply | AC 380V 50Hz | |
|---|---|---|---|
| Applicable to ISO 20′ container | control voltage | DC 24 | |
| Rated lifting capacity | 30t | system power | ≤8kW |
| Allowable load eccentricity | Length direction -0.65m Width direction -0.26m |
system rated pressure | 12MPa |
| protection grade | Ip55 | ||
| Load of lifting lug on four corner | 4 * 7.5 t | environmental temperature | -20℃~+40℃ |
| Operation form | Hydraulic cylinder drive | deadweight | 8t |
| Tilt degree | -2°~45° | tlting opening/closing time | 150/120s |
| Application | Headbolck , container spreader | ||
One container tilting spreader
| Specification:STO 02SF20-30 MS | Power supply | AC 380V 50Hz | |
|---|---|---|---|
| Applicable to ISO 20′ container | control voltage | DC 24 | |
| Rated lifting capacity | 30t | system power | ≤8kW |
| Allowable load eccentricity | Length direction -0.65m Width direction -0.26m |
system rated pressure | 12MPa |
| protection grade | IP55 | ||
| Load of lifting lug on four corner | 4 * 7.5 t | -20℃~+40℃ | |
| Operation form | Hydraulic cylinder drive | deadweight | 13t |
| Translation stroke | 350mm | translation opening/closing time | 12/8s |
| Tilt degree | -2°~45° | tlting opening/closing time | 150/120s |
| Application | Headbolck , container spreader | ||